ACUVUE Theravision with Ketotifen Dailymed

14 Clinical Studies

The safety and efficacy of ACUVUE^® Theravision™ with Ketotifen was assessed in two double-masked, randomized, placebo-controlled clinical conjunctival allergen challenge (CAC) studies (CR-4483 and CR-4484) and two 12-week safety studies (CR-4490 and CR-4539). Patients in these studies had allergic conjunctivitis induced by an ocular allergen challenge and refractive ametropia (myopia and hyperopia) suitable for contact lens wear without more than 1.00 D of astigmatism. A total of 244 patients (488 eyes) were evaluate in the CAC studies. A total of 491 subjects were exposed to ACUVUE^® Theravision™ with Ketotifen over a period of 12 weeks in the safety studies. These four studies demonstrated that ACUVUE^® Theravision™ with Ketotifen was safe and more effective than placebo (1•DAY ACUVUE^®) in preventing ocular itching in patients with allergic conjunctivitis. ACUVUE^® Theravision™ with Ketotifen reduced ocular itching within 3 minutes and the response was sustained for up to 12 hours after lens insertion. Visual acuity was comparable between ACUVUE^® Theravision™ with Ketotifen and 1•DAY ACUVUE^®.

Not all refractive powers, design configurations, or lens parameters available were tested in clinical investigation of the lenses. Therefore, when selecting an appropriate lens design, the Eye Care Professional should consider all characteristics of the lens that can affect lens performance and ocular health, including oxygen permeability, wettability, central and peripheral thickness and optic zone diameter. The potential impact of these factors on the patient's ocular health should be carefully weighed against the patient's need for refractive correction and prevention of itching associated with allergic conjunctivitis; therefore, the continuing ocular health of the patient and lens performance on the eye should be carefully monitored by the prescribing Eye Care Professional.

16 How Supplied/storage And Handling

ACUVUE^® Theravision™ with Ketotifen (etafilcon A drug-eluting contact lens with ketotifen) is a daily disposable contact lens, 19 mcg ketotifen per lens is supplied in a plastic buler bowl and a foil laminated lidstock containing a buffered ketotifen solution. The plastic package is marked with base curve, lens diameter, diopter (lens power), date of manufacture, expiration date and lot number.

ACUVUE^® Theravision™ with Ketotifen is supplied in a 30-count carton containing 30 foil sealed buler packages containing etafilcon A contact lens with 19 mcg ketotifen (NDC 60123-019-30).

STORAGE AND HANDLING SECTION

Store at 15°C to 25°C (59°F to 77°F). Protect from light. Store lenses in carton until use.

DO NOT to use if the ACUVUE^® Theravision™ with Ketotifen lens sterile buler package is opened or damaged.

17 Patient Counseling Information

Advise the patient to read the FDA-approved patient labeling (Patient Information).

Fitting

See the ACUVUE® Theravision™ with Ketotifen FITTING INSTRUCTION GUIDE for professional fitting instructions and information.

Wearing Schedule (Daily Wear)

Advise patients that ACUVUE^® Theravision™ with Ketotifen should not be used to treat red eye(s). Remove lens(es) immediately if the eye(s) become red or irritated.

A single ACUVUE^® Theravision™ with Ketotifen should be worn in each eye per day and should be discarded upon removal each day. The lens should not be worn beyond the period recommended by an eye care professional.

Advise patients that ACUVUE^® Theravision™ with Ketotifen should be removed prior to sleep.

Lens Handling and Care

Advise patients to not use if the ACUVUE^® Theravision™ with Ketotifen lens sterile buler package is opened or damaged.

Advise patients to always wash and rinse hands before handling lenses.

Advise patients to avoid contaminating hands or lenses with cosmetics, lotions, soaps, creams, deodorants or sprays. Instruct patients to put in lenses prior to applying makeup.

Advise patients not to touch contact lenses if hands have any foreign materials as microscopic scratches of the lenses may occur, which can cause distorted vision and/or injury to the eye.

Instruct patients to examine the lens after opening to be sure that it is a single, moist, clean lens that is free of any nicks or tears. If the lens appears damaged, patients should be instructed NOT to use it.

Instruct patients not to use contact lens cleaning and disinfectant solutions with ACUVUE^® Theravision™ with Ketotifen. Discard lens after a single day's use.

Advise patients that ACUVUE® Theravision™ with Ketotifen should not be worn while swimming or in hot tubs. Contact lens wear in these settings increases the risk of sight threatening eye infections from microorganisms.

If the lens sticks (stops moving), the patient should be instructed to remove the lens. A few drops of non-preserved sterile saline solution may be applied directly to the eye to assist with removal. If non-movement of the lens continues after a few minutes, the patient should immediately consult their Eye Care Professional.

Patients should be advised to notify the employer of being a contact lens wearer. Some jobs may require the use of eye protection equipment or may require that the patient not wear contact lenses.

Advise patients to avoid all harmful or irritating vapors and fumes while wearing lenses. If aerosol products, such as hair spray, are used while wearing lenses, exercise caution and keep eyes closed until the spray has settled.

Instruct patients to never use tweezers, fingernails, or other tools to remove lenses from the lens container. Instead, patients should remove ACUVUE^® Theravision™ with Ketotifen from the buler container packing solution using their fingertips. Patients should not touch the lens with fingernails.

The patients should be advised to never rinse the lenses in water from the tap. Tap water contains many impurities that can contaminate or damage the lenses and may lead to eye infection or injury.

Advise patients to always dispose of lenses when removed and have spare non-medicated lenses or spectacles available.

Concomitant Use of Other Medications

Advise patients to consult with their eyecare professional before using any medicine in the eyes. Advise patients that eye drops containing benzalkonium chloride should not be used simultaneously with ACUVUE® Theravision™ with Ketotifen. Instruct patients to wait 10 minutes after eye drop application before inserting lenses.

Daily self-examination

Instruct the patient to immediately remove the lens if any eye discomfort, eye pain, eye redness or decreased vision are experienced. If the symptoms stop after lens removal, the patient should discard the lens(es) and replace with new non-medicated lens(es). ACUVUE^® Theravision™ with Ketotifen should not be worn for the remainder of the day. If the problem continue after inserting a new non-medicated lens, the patient should remove the lens and IMMEDIATELY CONSULT THEIR EYE CARE PROFESSIONAL.

Emergencies

Advise the patient that if chemicals of any kind (household products, gardening solutions, laboratory chemicals, etc.) are splashed into the eyes, the patient should: FLUSH EYES IMMEDIATELY WITH TAP WATER AND IMMEDIATELY CONTACT THE EYE CARE PROFESSIONAL OR VISIT A HOSPITAL EMERGENCY ROOM WITHOUT DELAY.

Symbols Key

The following symbols may appear on the label or packaging:

SYMBOL	DEFINITION
	Caution, Consult Instructions for Use
	Manufacturer
	Date of Manufacture
	Use by Date (expiration date)
	Batch Code
	Sterilized Using Steam Heat
	Do Not Re-Use (Single Use)
	Do Not Use if Package is Damaged
	Store Away from Direct Sunlight
	Indicates a Single Sterile Barrier System
	Authorized Representative in the European Community
	Medical Device in the European Community
	Fee Paid for Waste Management
	CE-mark and Identification Number of Notified Body
	Contains Hazardous Substances
	Contains a Medicinal Substance
	CAUTION: U.S. Federal law restricts this device to sale by or on the order of a licensed practitioner
CONTACT LENS	Contact Lens
	Lens Orientation Correct
	Lens Orientation Incorrect (Lens Inside Out)
	Package Opening Icon (Buler)
DIA	Diameter
BC	Base Curve
D	Diopter (Lens Power)

Distributed by:Johnson & Johnson Vision Care, Inc.7500 Centurion ParkwayJacksonville, Florida 32256, USAwww.acuvue.com

©Johnson & Johnson Vision Care, Inc. 2021In Canada: Johnson & Johnson Vision Care, division of Johnson & Johnson, Inc.In USA: Johnson & Johnson Vision Care, Inc.Printed in USA

Revision date: 2/2022Revision number: XXXXXACUVUE^® Theravision™ is a trademark of Johnson & Johnson Vision Care, Inc.

Instructions For Use Section

ACUVUE^® Theravision™ with Ketotifen (etafilcon A lens with ketotifen)

For Eye Itch

for Daily Disposable Wear

FITTING INSTRUCTION GUIDE

Rx Only

CAUTION: US Federal law restricts this device to sale by or on the order of a licensed practitioner

PRODUCT DESCRIPTION

For full prescribing information see the ACUVUE® Theravision™ with Ketotifen Package Insert.

ACUVUE^® Theravision™ with Ketotifen is a sterile, soft (hydrophilic), spherical etafilcon A drug-eluting contact lens containing ketotifen, an H1 receptor antagonist, for topical administration to the eyes.

Ketotifen fumarate is a white to brownish-yellow, fine crystalline powder with a molecular formula of C₁₉H₁₉NOS-C₄H₄O₄ and formula weight of 425.50 g/mol. The buffered packaging solution of ACUVUE^® Theravisionâ„¢ with Ketotifen has a pH of 6.6 to 7.3 and an osmolality of 380 to 460 mOsm/Kg.

Contains:

•   Active: ketotifen 19 mcg per lens
•   Inactives: boric acid, calcium hydroxide, pentetic acid, sodium chloride, sodium borate, and water.

Chemical Name: 10H-Benzo[4,5]cyclohepta[1,2-b]thiophen-10-one, 4,9 dihydro-4-(1-methyl-4-piperidinylidene)-, hydrogen fumarate.

Structural Formula:



.This product does not contain an antimicrobial preservative.

The contact lens material (etafilcon A) is a copolymer of 2-hydroxyethyl methacrylate and methacrylic acid cross-linked with 1, 1, 1-trimethylol propane trimethacrylate and ethylene glycol dimethacrylate.

ACUVUE^® Theravision™ with Ketotifen contact lenses are tinted blue using blue 2-hydroxyethyl methacrylate to make the lenses more visible for handling.

Physical/Optical Properties of the Lens:
VALUE 21.4 × 10^-11 (cm²/sec) Fatt(boundary corrected, edge corrected)(ml O₂/ml × mm Hg) at 35°C

 

Specific Gravity (calculated):	0.98 – 1.12
Refractive Index:	1.40
Visible Light Transmittance:	90% minimum
Surface Character:	Hydrophilic
Water Content:	59%
Oxygen Permeability (D/k):
METHOD

Dosage Forms and Strengths:

etafilcon A drug-eluting contact lens with ketotifen

(19 mcgper lens).

How Supplied:

Each ACUVUE^® Theravision™ with Ketotifen (etafilcon A drug-eluting contact lens with ketotifen) lens is supplied in a foil-sealed plastic package containing a buffered ketotifen solution. The plastic package is marked with base curve, diopter power, diameter, lot number and expiration date.

AVAILABLE LENS PARAMETERS

The ACUVUE^® Theravision™ with Ketotifen Brand Contact Lenses are hemispherical shells of the following dimensions:

Diameter (DIA):	14.2 mm
Center Thickness:	Minus Lens - varies with power (e.g. -4.00D: 0.084 mm) Plus Lens - varies with power (e.g. +4.00D: 0.190 mm)
Base Curve (BC):	8.5 mm and 9.0 mm
Powers (D):	-0.50D to -10.00D (in 0.25D increments)-10.50D to -12.00D (in 0.50D increments)+0.50D to +6.00D (in 0.25D increments)

ACTIONS

See CLINICAL PHARMACOLOGY, Mechanism of Action section of the ACUVUE^® Theravision™ with Ketotifen Package Insert.

INDICATIONS AND USES

See INDICATIONS AND USAGE section of the ACUVUE^® Theravision™ with Ketotifen Package Insert.

CONTRAINDICATIONS (REASONS NOT TO USE)

See CONTRAINDICATIONS section of the ACUVUE^® Theravision™ with Ketotifen Package Insert.

WARNINGS

See WARNINGS AND PRECAUTIONS section of the ACUVUE^® Theravision™ with Ketotifen Package Insert.

PRECAUTIONS

See WARNINGS AND PRECAUTIONS section of the ACUVUE^® Theravision™ with Ketotifen Package Insert.

ADVERSE REACTIONS

See ADVERSE REACTIONS section of the ACUVUE^® Theravision™ with Ketotifen Package Insert.

FITTING

GENERAL FITTING GUIDELINES

Patient Selection

You should first assess the patient's needs to ensure that the patient is an appropriate candidate for ACUVUE^® Theravision™ with Ketotifen. ACUVUE^® Theravision™ with Ketotifen, like other soft contact lenses, will require the appropriate and usual physiological and diagnostic assessments necessary to ensure proper patient selection.

Pre-Fitting Examination

A pre-fitting patient history and examination are necessary to:

• Determine whether a patient is a suitable candidate for ACUVUE^® Theravisionâ„¢ with Ketotifen Contact Lens (consider allergies, patient hygiene and mental and physical state), and
• Take ocular measurements for the initial contact lens parameter selection, and
• Collect and record baseline clinical information to which post-fitting examination results can be compared.

A pre-fitting examination may include a determination of optimal distance and near spectacle correction and corneal curvature measurements. The near correction should be determined at the midpoint of the patient's habitual reading distance. When more than one power provides optimal reading performance, prescribe the least plus (most minus) of the powers that meet the patient's requirements.

Lens Selection

A. Initial Power Determination

A spectacle refraction should be performed to establish the patient's baseline refractive status and to guide in the selection of the appropriate lens power. Remember to compensate for vertex distance if the refraction is greater than ±4.00 D.

B. Base Curve Selection (Trial Lens Fitting)

An 8.5mm/14.2mm ACUVUE^® Theravision™ with Ketotifen Contact Lens should be the initial lens of choice for myopic patients regardless of keratometry readings. However, corneal curvature measurements should be performed to establish the patient's baseline ocular status.

An 8.5mm/14.2mm ACUVUE^® Theravision™ with Ketotifen Contact Lens should be placed on each of the patient's eyes and evaluated after the patient has adjusted to the lenses. A properly fit lens will center and completely cover the cornea (i.e., no limbal exposure), have sufficient movement with the blink to provide tear exchange under the contact lens and be comfortable. The lens should move freely when manipulated digitally with the lower lid, and then return to its properly centered position when released. If resistance is encountered when pushing the lens up, the lens is fitting tightly and should not be dispensed to the patient.

A steep fitting lens may exhibit one or more of the following characteristics: insufficient movement with the blink, conjunctival indentation and resistance when pushing the lens up digitally with the lower lid. If the 8.5mm/14.2mm ACUVUE^® Theravision™ with Ketotifen Contact Lens is judged to be steep fitting, it should not be dispensed to the patient.

A flat fitting lens may exhibit one or more of the following characteristics: decentration, incomplete corneal coverage (i.e., limbal exposure), excessive movement with the blink or edge standoff. If the 8.5mm/14.2mm ACUVUE^® Theravision™ with Ketotifen Contact Lens is judged to be flat fitting, it should not be dispensed to the patient.

If the initial ACUVUE^® Theravision™ with Ketotifen Contact Lens base curve is judged to be flat or steep fitting, the alternate base curve, if available, should be considered.

C. Final Lens Power

A spherical over-refraction should be performed to determine the final lens power after the lens fit is judged acceptable. The spherical over-refraction should be combined with the trial lens power to determine the final lens prescription.

•  Example 1:
  •  Diagnostic lens: -2.00 DSpherical over-refraction -0.25 DFinal lens power: -2.25 D
•  Example 2:
  •  Diagnostic lens: -2.00 DSpherical over-refraction +0.25 DFinal lens power: -1.75 D

MONOVISION FITTING GUIDELINES

Patient Selection

A. Monovision Needs Assessment

For a good prognosis the patient should have adequately corrected distance and near visual acuity in each eye. The amblyopic patient or the patient with significant astigmatism (greater than 1.00D) in one eye may not be a good candidate for monovision correction with the ACUVUE^® Theravision™ with Ketotifen Contact Lens.

Occupational and environmental visual demands should be considered. If the patient requires critical vision (visual acuity and stereopsis), it should be determined by trial whether this patient can function adequately with monovision correction.

Monovision contact lens wear may not be optimal for such activities as:

• (1)Visually demanding situations such as operating potentially dangerous machinery or performing other potentially hazardous activities: and
• (2)Driving automobiles (e.g., driving at night). Patients who cannot pass their state drivers license requirements with monovision correction should be advised to not drive with this correction, OR may require that additional over-correction be prescribed

B. Patient Education

All patients do not function equally well with monovision correction. Patients may not perform as well for certain tasks with this correction as they have with bifocal reading glasses. Each patient should understand that monovision, as well as other presbyopic alternatives, can create a vision compromise that may reduce visual acuity and depth perception for distance and near tasks. During the fitting process it is necessary for the patient to realize the disadvantages as well as the advantages of clear near vision and straight ahead and upward gaze that monovision contact lenses provide.

Eye Selection

Generally, the non-dominant eye is corrected for near vision. The following two methods for eye dominance can be used.

A. Ocular Preference Determination Methods

•  Method 1 Determine which eye is the "sighting eye". Have the patient point to an object at the far end of the room. Cover one eye. If the patient is still pointing directly at the object, the eye being used is the dominant (sighting) eye.
•  Method 2 Determine which eye will accept the added power with the least reduction in vision. Place a hand-held trial lens equal to the spectacle near ADD in front of one eye and then the other while the distance refractive error correction is in place for both eyes. Determine whether the patient functions best with the near ADD lens over the right or left eye.

Other methods include the refractive error method and the visual demands method.

B. Refractive Error Method

For anisometropic correction, it is generally best to fit the more hyperopic (less myopic) eye for distance and the more myopic (less hyperopic) eye for near.

C. Visual Demands Method

Consider the patient's occupation during the eye selection process to determine the critical vision requirements. If a patient's gaze for near tasks is usually in one direction, correct the eye on that side for near.

•  Example:
•  A writer who places copy to the left side of the desk will function best with the near lens on the left eye.

SPECIAL FITTING CHARACTERISTICS

Near ADD Determination

Always prescribe the lens power for the near eye that provides optimal near acuity at the midpoint of the patient's habitual reading distance. However, when more than one power provides optimal reading performance, prescribe the least plus (most minus) of the powers.

Trial Lens Fitting

A trial fitting is performed in the office to allow the patient to experience monovision correction. Lenses are fit according to the General Fitting Guidelines for base curve selection described in this guide.

Case history and standard clinical evaluation procedure should be used to determine the prognosis. Determine the distance correction and the near correction. Next determine the near ADD. With trial lenses of the proper power in place, observe the reaction to this mode of correction.

Allow the lenses to settle for about 20 minutes with the correct power lenses in place. Walk across the room and have the patient look at you. Assess the patient's reaction to distance vision under these circumstances. Then have the patient look at familiar near objects such as a watch face or fingernails. Again assess the reaction. As the patient continues to look around the room at both near and distance objects, observe the reactions. Only after these vision tests are completed should the patient be asked to read print. Evaluate the patient's reaction to large print (e.g., typewritten copy) at first and then graduate to newsprint and finally smaller type sizes.

After the patient's performance, under the above conditions, is completed, tests of visual acuity and reading ability under conditions of moderately dim illumination should be attempted.

An initial unfavorable response in the office, while indicative of a guarded prognosis, should not immediately rule out a more extensive trial under the usual conditions in which a patient functions.

Adaptation

Visually demanding situations should be avoided during the initial wearing period. A patient may at first experience some mild blurred vision, dizziness, headaches and a feeling of slight imbalance. You should explain the adaptational symptoms to the patient. These symptoms may last for a brief minute or for several weeks. The longer these symptoms persist, the poorer the prognosis for successful adaptation.

To help in the adaptation process, the patient can be advised to first use the lenses in a comfortable familiar environment such as in the home.

Some patients feel that automobile driving performances may not be optimal during the adaptation process. This is particularly true when driving at night. Before driving a motor vehicle, it may be recommended that the patient be a passenger first to make sure that their vision is satisfactory for operating an automobile. During the first several weeks of wear (when adaptation is occurring), it may be advisable for the patient to only drive during optimal driving conditions. After adaptation and success with these activities, the patient should be able to drive under other conditions with caution.

Other Suggestions

The success of the monovision technique may be further improved by having your patient follow the suggestions below. Remember to advise patients to use only one ACUVUE^® Theravision™ with Ketotifen Contact Lens per eye per day.

• Have a third contact lens (distance power) to use when critical distance viewing is needed.
• Have a third contact lens (near power) to use when critical near viewing is needed.
• Having supplemental spectacles to wear over the monovision contact lenses for specific visual tasks may improve the success of monovision correction. This is particularly applicable for those patients who cannot meet state driver licensing requirements with a monovision correction.
• Make use of proper illumination when carrying out visual tasks.

Success in fitting monovision can be improved by the following suggestions:

• Reverse the distance and near eyes if a patient is having trouble adapting.
• Refine the lens powers if there is trouble with adaptation. Accurate lens power is critical for presbyopic patients.
• Emphasize the benefits of clear near vision and straight ahead and upward gaze with monovision.

The decision to fit a patient with a monovision correction is most appropriately left to the Eye Care Professional in conjunction with the patient after carefully considering the patient's needs.

PATIENT COUNSELING INFORMATION (PATIENT MANAGEMENT)

Dispensing Visit

• Evaluate the physical fit and visual acuity of the lens on each eye.
• Teach the patient how to insert and remove his or her lenses.
• Explain the daily wear regimen and schedule a follow-up examination.

Provide the patient with a copy of the ACUVUE^® Theravision™ with Ketotifen patient instructions. Review these instructions with the patient so that he or she clearly understands the prescribed wearing and replacement schedule.

Review with the patient that no cleaning or disinfection is needed with daily disposable lenses. Patients should always dispose of lenses when they are removed and have spectacles or non-medicated lenses available.

Follow-Up Examinations

Follow-up care (necessary to ensure continued successful contact lens wear) should include routine periodic progress examinations, management of specific problems, if any, and a review with the patient of the wear schedule, lens replacement schedule, and proper lens care and handling procedures.

Recommended Follow-up Examination Schedule for ACUVUE^® Theravision™ with Ketotifen for Daily Disposable Wear: (complications and specific problems should be managed on an individual patient basis):

• One week from the initial lens dispensing to patient.
• One month post-dispensing.
• Every three to six months thereafter.

NOTE: Preferably, at the follow-up visits, lenses should be worn for at least six hours.

Recommended Procedures for Follow-Up Visits:

• Solicit and record patient's symptoms, if any.
• Measure visual acuity monocularly and binocularly at distance and near with the contact lenses.
• Perform an over-refraction at distance and near to check for residual refractive error.
• With the biomicroscope, judge the lens fitting characteristics (as described in the "General Fitting Guidelines") and evaluate the lens surface for deposits and damage.
• Following lens removal, examine the cornea and conjunctiva with the biomicroscope and fluorescein.
  • The presence of vertical corneal striae in the posterior central cornea and/or corneal neovascularization is indicative of excessive corneal edema.
  • The presence of corneal staining and/or limbal-conjunctival hyperemia can be indicative of an unclean lens, a reaction to solution preservatives, excessive lens wear and/or a poorly fitting lens.
  • Papillary conjunctival changes may be indicative of an unclean and/or damaged lens.
• Periodically perform keratometry and spectacle refractions. The values should be recorded and compared to the baseline measurements.

If any observations are abnormal, use professional judgment to alleviate the problem and restore the eye to optimal conditions. If the criteria for successful fit are not satisfied during any follow-up examinations, repeat the patient's trial fitting procedure and refit the patient.

WEARING SCHEDULE (DAILY WEAR)

DOSAGE AND ADMINISTRATION

• Insert one lens per eye per day. Discard lens after a single day's use.
• If prevention or relief of itching is needed beyond twelve hours, remove ACUVUE^® Theravisionâ„¢ with Ketotifen and consult your eye care professional.
• ACUVUE^® Theravisionâ„¢ with Ketotifen may be worn beyond twelve hours for vision correction. Lenses should be removed prior to sleeping.

ADDITIONAL INFORMATION

• The maximum daily wearing time should be determined by the Eye Care Professional based upon the patient's individual response to contact lenses. Regular checkups, as determined by the Eye Care Professional, are also extremely important.
• Patients tend to over wear the lenses initially. The Eye Care Professional should emphasize the importance of adhering to the initial maximum daily wearing time. Maximum wearing time should be determined by the Eye Care Professional based upon the patient's physiological eye condition, because individual response to contact lenses varies.
• ACUVUE^® Theravisionâ„¢ with Ketotifen is intended to be worn once on a daily disposable basis (less than 24 hours, while awake) and should be discarded upon removal. Studies have not been performed to show that ACUVUE^® Theravisionâ„¢ with Ketotifen is safe to wear during sleep.
• Patients should never wear lenses beyond the period recommended by the Eye Care Professional.

REPLACEMENT SCHEDULE

• These lenses are indicated for disposable wear and should be discarded upon removal.

LENS CARE DIRECTIONS

For Lenses Prescribed for Single Use Disposable Wear:

• The Eye Care Professional should review with patients that no cleaning or disinfection is needed with disposable lenses. Patients should always dispose of lenses when they are removed and have replacement non-medicated lenses or spectacles available.

Care for Sticking (Non-Moving) Lenses

• During removal, if the lens sticks to the eye, the patient should be instructed to apply a few drops of non-preserved sterile saline solution directly to the eye and wait until the lens begins to move freely on the eye before removing it. If non-movement of the lens continues after a few minutes, the patient should immediately contact the Eye Care Professional.

STORAGE CONDITIONS

Store at 15°C to 25°C (59°F to 77°F); with excursions permitted up to 30°C (86°F).

Protect from light. Store lenses in carton until use.

EMERGENCIES

The patient should be informed that if chemicals of any kind (household products, gardening solutions, laboratory chemicals, etc.) are splashed into the eyes, the patient should: FLUSH EYES IMMEDIATELY WITH TAP WATER AND IMMEDIATELY CONTACT THE EYE CARE PROFESSIONAL OR VISIT A HOSPITAL EMERGENCY ROOM WITHOUT DELAY.

REPORTING OF ADVERSE REACTIONS

All serious adverse experiences and adverse reactions observed in patients wearing these lenses or experienced with the lenses should be reported to:

Johnson & Johnson Vision Care, Inc.7500 Centurion ParkwayJacksonville, Florida 32256, USAwww.acuvue.com

©Johnson & Johnson Vision Care, Inc. 2021In Canada: Johnson & Johnson Vision Care, division of Johnson & Johnson, Inc.In USA: Johnson & Johnson Vision Care, Inc.Printed in USARevision date: 2/2022Revision number: XXXXXXACUVUE^® Theravision™ is a trademark of Johnson & Johnson Vision Care, Inc.